installation on a computer processor

                      

HOW TO POST PROCESSOR COMPUTER

 
    following installation of the processor on the socket means:
1. Open limb or hook lock on the ZIF socket on the motherboard by pulling the leg socketnya up to an angle of 90 degrees.
2. Put the processor into the socket to maintain a state socket.perhatikan legs so the legs of the processor in conditions totally plugged into a socket.
3. Next, press the processor down to the right position and right.
4. If the processor socket is complete embedded in the return leg socket cap into position.
5. Once the processor heatsink fan installed socketnya pairs and the binder is in heatsink with a hook that is in the processor socket.
6. before that usually give the glue cooling (thermal paste) for rub on the surface of the processor.
7. after heahsink fan is properly installed. connect the heatsink fan cable to the connector-CPU-power suply fan located on the motherboard
Here are the steps.
• Prepare Processor.
• Take a processor and note that there are indentations on both sides of the processor. These markers as a guide to install the processor is to match the marks on the motherboard socket.

Note the indentations on both sides of the processor

• Open the hook LGA775 socket on the motherboard.

Open hook socket

• Install the processor on the socket and lock it again.

Replace the processor correctly
 
• Install the fan on the processor by matching all four legs made of white plastic with four holes on the motherboard. To lock the fan tap into four head lock by hand so that it will automatically lock. Make sure the fan is not skewed.



A few information on how to install the processor to the motherboard. May be useful ...